Introduction of high lift truck
High lift truck is a new design with larger piston to offer you real 1000kg and 1500kg capacity. This series JL are manual high lift pallet jack and JE are electric high lift truck. It is very suitable as 组合式手动搬运车和升降台。符合人体工程学的温暖手柄，操作起来非常简单舒适。此外，前叉支脚上升时，前支撑腿和可调节稳定器会自动延伸到地板上，从而确保最大的稳定性和最佳的制动效果。无论卡车有载还是无载，它都可以保持相同的速度。
This high lift pallet trucks can lift the pallets loading or unloading to the height you need. they can be used in various applications like factory, workshop, warehouse etc.
The manual high lift pallet truck has model: JL5210, JL6810, JL5215, JL6815;
The electric high lift pallet truck has model: JE5210, JE6810, JE5215, JE6815
Manual high lift pallet truck JL series
We have this item in stock in France, if you are located in Europe, we can arrange delivery to you ASAP! This way will save your time and shipping cost.
Specifications of manual high lift skid jack truck:
| 我电梯号 | 1410601 | 1410603 | 1410605 | 1410607 | ||
| 模型 | JL5210 | JL6810 | JL5215 | JL6815 | ||
| 容量 | 公斤（磅） | 1000(2200) | 1500(3300) | |||
| 货叉高度 | 毫米（英寸） | 85-800(3.3-31.5) | ||||
| 货叉总宽 | 毫米（英寸） | 520(20.5) | 680(26.8) | 520(20.5) | 680(26.8) | |
| 货叉长度 | 毫米（英寸） | 1140(44.9) | 1140(44) | |||
| 尺寸 | C | 毫米（英寸） | 600(23.6) | 600(23.6) | 560(22) | 560(22) |
| Ë | 530(20.9) | |||||
| H | 1250(49.2) | |||||
| 净重 | 公斤（磅） | 105(231) | 112(246.4) | 118(259.6) | 125(275) | |
Electric high lift pallet truck JE series
- High quality oil cylinder: The integrally sealed hydraulic cylinder can effectively avoid the disadvantages of oil leakage, improve the safety performance of the whole vehicle, lift quickly and improve work efficiency.
- Comfortable handle: Ergonomic design, the outer layer is rubberized and non-slip, the operation feels comfortable, and the drop speed of the hand-pulled pressure relief heavy cargo is controllable, which improves the operation safety.
- Exquisite workmanship: The surface of the car body has been subjected to high temperature baking paint, electrostatic spraying, the surface is smooth and smooth, durable, beautiful and corrosion-resistant.
- Anti-pinch scissors: The scissors are designed with increased spacing and anti-clamping to prevent accidental clamping of other items. Thickened steel enhances the bearing capacity, making it safer and more durable.
Specifications of electric high lift pallet truck:
| 我电梯号 | 1410602 | 1410604 | 1410606 | 1410608 | ||
| 模型 | JE5210 | JE6810 | JE5215 | JE6815 | ||
| 容量 | 公斤（磅） | 1000(2200) | 1500(3300) | |||
| 货叉高度 | 毫米（英寸） | 85-800(3.3-31.5) | ||||
| 货叉总宽 | 毫米（英寸） | 520(20.5) | 680(26.8) | 520(20.5) | 680(26.8) | |
| 货叉长度 | 毫米（英寸） | 1140(44.9) | 1140(44) | |||
| 尺寸 | C | 毫米（英寸） | 600(23.6) | |||
| Ë | 530(20.9) | |||||
| H | 1250(49.2) | |||||
| 电池 | （Ah / v） | 70/12 | ||||
| 充电器 | （影音） | 8/12 | ||||
| 净重 | 公斤（磅） | 140(308) | 147(323.4) | 149(327.8) | 157(345.4) | |
Features of high lift trucks:
- 非常容易。泵和轻便使这个单位非常适合作为组合的手动托盘车和升降台
- 通过独特的液压阀实现自动下降速度控制，无论卡车有载还是无载，下降速度始终保持不变。这将防止货物快速下降造成损坏。
- 重型设计：4mm钢板叉架和更大的提升活塞确保卡车达到额定容量。
- 非常适合作为组合式手动搬运车和升降台
- 前叉达到420mm的高度时，前支撑腿和可调节稳定器会自动延伸到地板上，以确保最大的稳定性和最佳的制动效果。
- 符合EN1757-4。
注意和维护：
不要超载；
是否允许使用地面条件；
正确装载货物；
搬运时穿戴安全鞋和手套；
每次使用前请进行彻底的操作检查；
用正确的提升技术组装机器；
Don't overlook the potential dangers that may exist during operation.
Proper maintenance will extend the life of the truck.
Check the oil, remove air and lubricate during maintenance.
Check the oil level every six months.
The newly injected oil to the rubber container should be 5mm below the liquid level, and the fork must be at the lowest position when adding oil.
When replacing the seal, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times.
Lubricate the movable part with motor oil or oil.
Also pay attention to daily inspection and maintenance.
Inspection of the truck can reduce wear as much as possible.
Special attention should be paid to the wheel, axle, handle, fork, lift and lowering control.
Whenever work is completed, the fork should be unloaded and lowered to the lowest position.
